In all of the 600 Series subwoofers, the bass driver diaphragms are constructed from a rugged, finely-tuned mix of paper pulp, Kevlar® fibres and resin, which provides the stiffness needed to withstand the tremendous physical forces exerted by the voice coil and pressures inside the cabinet.
Ultra-solid construction delivers slamming bass, drum kicks, and special movie effects. Deformation is minimised; bass precision, power and enjoyment are maximised.
Specifications
| Crossover Tuning | Yes |
| Mushrooms | Yes |
| Description | Active closed-box subwoofer system |
| Drive unit | ø200mm (8 in) paper/Kevlar® cone long-throw |
| Frequency range | -6dB at 23Hz and 25/140Hz adjustable (EQ at A) |
| Frequency response | ±3dB 32Hz – 40/140Hz adjustable (EQ at A) |
| Bass Extension | -6dB at 23Hz (position A) -6dB at 28Hz (position B) -6dB at 36Hz (position C) |
| Amplifier | Power output: 200W |
| Rated power consumption: | 40W/ 0.5W standby |
| Input impedance: | 33k ohms |
| Signal / noise: | >90dB |
| Functions: | Volume level – line in Volume level – speaker in Low-pass filter frequency – line in only Low-pass filter bypass Bass extension Bass roll-off alignment Auto sense on/standby Phase switch |
| Inputs: | Line In (RCA Phono) Speaker in (Binding post) 12v trigger (3.5mm jack) Low-pass filter Active 4th-order, variable cut-off frequency |
| Dimensions | Height: 260mm (10.2 in) not including feet Width: 260mm (10.2 in) Depth: 330mm (13 in) including grille and controls |
| Net weight | 8.85kg (19.5 lb) |
| Finishes | Soft Black |